Products

Two layers
600 mm x 3000 mm x 11 mm thickness
(23.6 in. x 118.1 in. x 0.43 in. thickness)
700 mm x 3000 mm x 11 mm thickness

G-IRON FLEX

G-Iron Flex is the most innovative and versatile product of G-Iron System. It is a flexible fabric made of G-Iron L.I.F. and laminated with a 0.14 mm (.005 in.) glass reinforced polypropylene tape. This tape is tested under the ASTM (D3330, D3759, D3652). The result is a very flexible product, protected against corrosion and usable in humid places i.e. when it is necessary to lay G-Iron inside concrete.

Standard size:
Rolls 650 mm (25.6 in.) wide, 25 m (75.7 feet) long.
Narrower widths and different roll lengths on request.

 

SHIELDING FLOATING FLOOR

Floating floor panels are produced with two layers of G-IronL.I.F. or G-Iron H.I.F. interposed with fire resistant Calcium Sulfate panels. On the bottom side panels are laminated with a 0.05 mm (.0002 in.) aluminum layer; this layer helps discharging electrostatic energy to ground and limits the effect of humidity that eventually might be present under the floating floor. The standard upper surface is made of 1 mm (04 in.) antistatic laminate. Other materials for the upper side are available on request as well as the mechanical structure to assemble the floating floor. All panels are 600 mm x 600 mm x 38 mm (23.6 in. x 23.6 in. x 1.49 in.) and their sides are covered with a 5 mm (.02 in.) ABS tape.

Standard size:
600 mm x 600 mm x 38 mm (23.6 in. x 23.6 in. x 1.49 in.)


G-IRON H.E.2 e G-IRON H.E.3  

G-iron H.E.2 e H.E.3 standard shielding systems are made of one or two G-iron Flex L.I.F. layers and one layer of 3 mm (0.11”) aluminum alloy. The total thickness of H.E.2 (one layer G-iron Flex plus one layer of 3 mm aluminum alloy) is 3,70 mm (0.14”) , while the total thickness of H.E.3 (two layers G-iron Flex plus one layer of 3 mm aluminum alloy) has a total thickness of 4,50 mm (0.17”). The choice between H.E.2 and H.E.3 is determined by several factors: desired shielding efficiency, strength of magnetic field, characteristics of the area to be shielded, practical considerations.

G-iron H.E.2:
1 G-iron Flex LIF layer
1 3 mm (0.11”) aluminum alloy panel

H.E.2 total thickness: 3,70 mm (0.14”)
Total thickness of the holding structure for walls: 50 mm

The installation on walls of both systems is done by fixing a metal holding structure to the wall and then attaching the shielding panels to the holding metal structure. The metal support structure has a thickness of 50 mm. G-iron shielding panels are usually covered with plasterboard panels or other materials in order to obtain an aesthetically pleasing look or to obtain specific functional characteristics (i.e. protection against fire).

G-iron H.E.3:
2 G-iron Flex LIF layers
1 3 mm (0.11”) aluminum alloy panel

H.E.3 total thickness: 4,50 mm (0.17”)
Total thickness of the holding structure for walls: 50 mm

H.E.2 e H.E.3 shielding materials can be pre-formed according to customer’s needs, like shielding cable trays for cables of different sizes.

Formato Standard: Base + Coperchio
Larghezza: 340 mm
Altezza: 330 mm
Lunghezza: 1250 mm